Create Conductivity Monitor

CM-240 Conductivity Monitor Performance features This instrument is a panel instrument for on-line monitoring of industrial process conductivity. Range switch over and constant check can both be freely set and adjusted through the operation component on the rear panel; unique signal collecting and processing technology and special thick film circuit are adopted to make measurement accurate and operation stable; there are also other features such as linearized data, automatic temperature compensation, not subject to the length change of cable and maintenance-free. It’ s an ideal auxiliary instrument of various types of small pure water equipment. Main technical specifications Measurement range: 0~ 20 0~ 200 0~ 2000¼ S/ cm Accuracy: 1.5% ( FS) Stability: ± 2 × 10-3 ( FS) / 24h Auxiliary electrode: Plastic structure; constant: 1.0cm-1 Temperature compensation component: NTC Medium temperature: 5~ 50 Output signal: Non-isolated 4-20mA signal output Maximum load impedance: 300© Max@ 24V DC, instrument mode Thread dimension: 1/ 23pipe thread Medium pressure: 0~ 0.5Mpa Cable composition: RVP + coaxial 75-2 double shield Cable length: 5m or on other agreement ( 5~ 30m) Temperature compensation: Automatic compensation with 25 as the reference temperature Display: 3.5-bit Red LED Power supply: AC 220V ± 10% 50Hz Power consumption: d1W Environment conditions: Temperature: 5~ 50 Humidity: d85% RH Dimensions: 48 × 96 × 100mm ( height × width × depth) Slot dimensions for installation: 45 × 91mm ( height × width) Installation: Jam-in